|
The following are the most frequently asked questions regarding the Evans Bender. If you have any additional questions, please do not hesitate to call our Customer Service Department at 1-800-662-0339.
Is the Evans Bender easy to use?
Yes. Three simple steps allow you to make the perfect offset bend.
- Insert conduit into traveling shoe and rising shoe. Close the front abutment.
- Using the standard multiplier printed right on the machine, move the traveling shoe to the correct distance to match the desired height and degree of the bend.
- Raise the rising shoe to the desired bend height.
Back to FAQ list
Is the Evans Bender easy to set up?
Yes. Product arrives in two boxes. 3-bolt setup requires only a socket wrench.
Back to FAQ list
Is the Evans Bender easy to learn?
Easy to follow instructions are included for quick learning. Formulas and rulers are printed right on the machine for quick reference.
Back to FAQ list
What kind of bends will the Evans Bender make?
Makes perfect offsets, kicks, saddle bends, matching offset bends, and box offsets up to 25 inches. Bends from 0 to 45 degrees.
Back to FAQ list
What size and type of conduit will it bend?
The Evans Bender bends seven types of pipe without changing shoes: 1/2", 3/4" and 1" EMT, 1/2" and 3/4" IMC, rigid and PVC coated.
Back to FAQ list
Is the Evans Bender portable?
Yes. Our heavy-duty wheels allow for maneuverability in the shop or at the job site.
Back to FAQ list
Where can I purchase the Evans Bender?
You can either purchase it online at this site or call our toll free number: 1-800-622-0339.
Back to FAQ list
What types of jobs are best suited for the Evans Bender?
From small rehab jobs to larger industrial projects, the Evans Bender can be used anywhere there is a need to make a perfect offset. It allows anyone on the job site to consistently and accurately make specialized bends. You can also use it at the shop to prefabricate the bends needed at the job site.
Back to FAQ list
Can I find replacement parts for the Evans Bender?
The Evans Bender is made in the USA using only quality steel parts and gears. If, for some reason, a part should fail, just call our toll free number: 1-800-662-0339. We have the replacement parts that you will need and will work with you to get your machine working as quickly as possible.
Back to FAQ list
What kind of maintenance does the Evans Bender require?
Very little. Just spray some WD40 on the gears and gear shaft after each use to keep the product lubricated. However, we do recommend limiting exposure to the elements.
Back to FAQ list |
